rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Techmount

Magellan

EcoXGear®

Dynojet

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Luggage

Audio and Tech

Air Filter

Covers

Overfenders & Flares

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These heated grips are a rider’s best friend in cold weather conditions, eliminating the aches that come with cold air, wind, and rain out on the trail.  

&nbsp;

<ul>
	<li>3-position switch: Off, Low, High</li>
	<li>Simple plug-and-play design &mdash; no cutting, splicing, or crimping of wires</li>
	<li>Easy clamp installation &mdash; no grip glue needed</li>
	<li>Low power consumption &mdash; draws less than 3 amps while in use</li>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

The WARN® UTV Synthetic Rope Update Kit includes everything needed to upgrade the 2,500 or 3,500 pound winch from wire to synthetic rope.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>50 feet of 3/16&rdquo; of synthetic rope</li>
	<li>Compatible with 2,500 and 3,500 lb. VRX winches</li>
	<li>WARN Epic Hawse Fairlead with mounting bolts</li>
	<li>Winch rope anchor puck</li>
	<li>Abrasion sleeve</li>
</ul>

The SE Front Grab Bar helps provide protection to components of the front of the ATV while offering a large hand hold to maneuver the machine. Constructed of 1” diameter, 6063 aluminum alloy tubing and durable black powder-coat finish. 

The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Boosts engine compression ratio to 13.0:1
	</li>
	<li>
	1.5 to 3 hp increase throughout most of the power band
	</li>
	<li>
	No crank rebalancing necessary
	</li>
</ul>

&nbsp;

Note: GYTR Top End Gasket Kit required for installation, sold separtely

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

The GYTR® 520 GDO2 O-Ring Chain offers the ultimate balance of performance and durability and is ideal for small and mid-sized off-road motorcycles, sportbikes, and ATVs up to 650cc. Chains will not work on vehicles with a shaft drive.

&nbsp;

Note YZF-R6 and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 650cc</li>
	<li>Clip-type and rivet-type master links included</li>
	<li>Replacement clip-type and rivet-type master links also available, each sold separately</li>
	<li>Tensile strength = 8,000lbs</li>
	<li>120 links</li>
</ul>

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

The Yamaha Sport ATV Cover helps protect your ATV while in storage. Storage bag included.

This rugged mount allows you to take along a personal size, 6-can mini cooler so you have some drinks when you take a break out on the trail.

&nbsp;

<ul>
	<li>Bent sheet steel construction for strength and durability</li>
	<li>Can mount to either the front or rear stock rack</li>
	<li>Rubber padding to prevent cooler from sliding</li>
	<li>Includes nylon strap and buckles for securing cooler</li>
	<li>Dimensions of carrier base: 11.5&rdquo; x 8.5&rdquo;</li>
</ul>

These Utility ATV Rigid Cargo Boxes feature a solid plastic design for durability with solid integrated hinged lids. Water and dirt-resistant seal and design. Two cam-over elastic latches which can be locked with padlocks. Solid mounting system that works with most Utility ATV racks.

&nbsp;

<ul>
	<li>Front trunk: 30&quot;L x 13&quot;W x 9&quot;H</li>
	<li>Rear trunk: 37&quot;L x 16&quot;W x 14&quot;H</li>
</ul>

These overfenders feature a tough, aggressive look and a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable TPO plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
</ul>

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

The ATV Seat Heater by Heat Demon is a thin, flexible seat heater that installs underneath stock seat cover and warms up fast. Includes on/off switch or can be used with the controller that comes with the Heat Demon&reg; Quad Zone&nbsp;ATV Heated Grips, sold separately. Heater measures 10" x 9" and foam cover mesures 12" x 10".

A collaboration with Heat Demon.&nbsp;

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

Direct replacement for the wire rope of the WARN 2500 lb. winch.

This rugged Front Brush Guard is designed to provide additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile of the Kodiak 450.

&nbsp;

<ul>
	<li>Helps protect the front end and headlights while complementing the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Black powder-coated finish</li>
	<li>Includes mounting hardware</li>
</ul>

The Rear Bash Plates provides lightweight, durable protection for the rear of the unit.

The Rear Grab Bar is made of special ball-burnished aluminum tube construction. Flag/whip mounting tab is included.

The GYTR 520 GTS2 Quadra-Ring Chain is the premier GYTR X-Ring chain that is a great replacement chain for race applications up to 1200cc.

The 520 GTS2 offers the same exceptional &quot;X-Ring&quot; features of the GDX2 chain, with up to 50% longer life and less friction than a traditional O-Ring-type chain.

Note FZ1, YZF-R6, and YZF-R6S: 
GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>Displacement limit: up to 1200cc</li>
	<li>Rivet-type master link included</li>
	<li>Replacement rivet-type master link also available, sold separately</li>
	<li>Tensile strength = 9,400lbs</li>
	<li>120 links</li>
	<li>Gold colored chain and links</li>
</ul>

This kit allows for the removal of the air induction system (AIS) from your ATV to reduce weight.

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

This 2” Receiver Hitch is an easy bolt-on that allows you to use a standard ball mount to haul a small trailer or other implement with ease.

Do not exceed recommended tongue or towing weight. Standard equipment on the following 2016 models: Grizzly LE, Grizzly EPS SE, Kodiak 700 EPS, and Kodiak 700 EPS SE.

<ul>
	<li>Accepts 2&rdquo; receiver and standard hitch pin</li>
	<li>Pin not included&nbsp;</li>
</ul>

GYTR Pre-Filter filters dirt with no critical airflow or power loss requiring less maintenance in dusty conditions.

The GYTR® Multi-Stage Foam Filter has a special two-stage design for maximum airflow and superior filtration for greater engine protection.

Service with Yamaha Genuine Foam Filter Oil available from your Yamaha dealer.

Not for use with GYTR Billet Air Filter Adaptor Plate.

The ATV Thumb Warmer by Heat Demon keeps riders thumb warm in cold weather. The warmer features a simple hi/lo/off operation and is easy to install- just peel and press.

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES