rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Techmount

Magellan

EcoXGear®

Dynojet

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Audio and Tech

Air Filter

Covers

Overfenders & Flares

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These heated grips are a rider’s best friend in cold weather conditions, eliminating the aches that come with cold air, wind, and rain out on the trail.  

&nbsp;

<ul>
	<li>3-position switch: Off, Low, High</li>
	<li>Simple plug-and-play design &mdash; no cutting, splicing, or crimping of wires</li>
	<li>Easy clamp installation &mdash; no grip glue needed</li>
	<li>Low power consumption &mdash; draws less than 3 amps while in use</li>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

The kit includes piston rings, piston pin, and clips (uses stock replacements). Requires use of minimum 100-octane racing fuel.

<ul>
	<li>
	Boosts engine compression ratio to 13.0:1
	</li>
	<li>
	1.5 to 3 hp increase throughout most of the power band
	</li>
	<li>
	No crank rebalancing necessary
	</li>
</ul>

&nbsp;

Note: GYTR Top End Gasket Kit required for installation, sold separtely

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

The WARN® UTV Synthetic Rope Update Kit includes everything needed to upgrade the 2,500 or 3,500 pound winch from wire to synthetic rope.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>50 feet of 3/16&rdquo; of synthetic rope</li>
	<li>Compatible with 2,500 and 3,500 lb. VRX winches</li>
	<li>WARN Epic Hawse Fairlead with mounting bolts</li>
	<li>Winch rope anchor puck</li>
	<li>Abrasion sleeve</li>
</ul>

This kit allows for the removal of the air induction system (AIS) from your ATV to reduce weight.

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

The GYTR® Billet Clutch Inner Hub is precision machined from the highest grade of aluminum, then hard anodized to achieve an exceptionally hard wear-resistant surface. Additional oil passages help improve clutch performance and contribute to a 20% weight reduction and less rotational mass for improved acceleration.

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

The Yamaha Sport ATV Cover helps protect your ATV while in storage. Storage bag included.

Direct replacement for the wire rope of the WARN 3500 lb. winch.

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

These Aluminum A-Arm Skid Plates help protect A-arms, steering, and suspension components. Constructed of strong, lightweight aluminum alloy sheet metal.

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500, 3,500 and 4,500 pound capacities</li>
	<li>3,500 lb.: 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of wire Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 2,500 pound capacities</li>
	<li>2,500 lb.: 3/16&rdquo; wire rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
	<li>See unit specific fitment for required winch mount and/or wiring kit</li>
</ul>

The Dual Zone ATV Heated Grips by Heat Demon include heated grips, thumb warmer, and mountable controller that regulates heat between the thumb and grips. Controller offers five levels of heat, has multiple mounting options, and provides LED light level indicators that dim for night time use. Totals 40 watts and draws less than 3 amps. Fits all 7/8" handlebars.

A collaboration with Heat Demon.&nbsp;

These overfenders feature a tough, aggressive look, and have a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable thermoplastic olefin (TPO) plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
	<li>Minor drilling and trimming may be required</li>
	<li>Includes mounting hardware</li>
</ul>

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

Direct replacement for the synthetic rope of the WARN 4500 lb. winch.

This 2” Receiver Hitch is an easy bolt-on that allows you to use a standard ball mount to haul a small trailer or other implement with ease.

Do not exceed recommended tongue or towing weight. Standard equipment on the following 2016 models: Grizzly LE, Grizzly EPS SE, Kodiak 700 EPS, and Kodiak 700 EPS SE.

<ul>
	<li>Accepts 2&rdquo; receiver and standard hitch pin</li>
	<li>Pin not included&nbsp;</li>
</ul>

These rack extensions feature a rugged design and add functional cargo space to the OE racks. Constructed of bent steel tubing for strength and durability. The Rear Rack Extension extends rear rack height to 7.5”.

<ul>
	<li>Compatible with accessory Gun Boot Mount, Cooler Carrier, and Rack Storage Bags (all sold separately)</li>
	<li>Black powder-coated finish</li>
	<li>Easy to install racks using included hardware</li>
</ul>

These HI/LO ATV Heated Grips by Heat Demon® increase rider comfort.

A collaboration with Heat Demon.&nbsp;

<ul>
	<li>
	Even and consistent heat distribution from unique flex-circuit technology
	</li>
	<li>
	Special molded rubber grips
	</li>
	<li>
	Totals 40 watts and draws less than 3 amps
	</li>
	<li>
	Fits all 7/8&quot; handlebars
	</li>
</ul>

These Front A-Arm Skid Plates provide lightweight, durable protection to lower A-arms. Integrated drain holes guard against mud packing and make for easier cleanup. Brushed aluminum finish.

These Yamaha Shock Covers help protect against rocks and debris. Heat-venting holes included for maximum performance. Easy to install and remove.

The same benefits of the Pro Single but multiplied by two. Despite the bumpiest terrain your gun, bow, ice auger, etc. will be in the exact place you originally put it in by the end of your journey. Fits all Utility ATV Racks.

<ul>
	<li>
	Provides an additional 16&quot; of horizontal adjustability once mounted
	</li>
	<li>
	Fits any FlexGrip&trade; product
	</li>
	<li>
	Easy to install
	</li>
</ul>

&nbsp;

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

The SE Front Grab Bar helps provide protection to components of the front of the ATV while offering a large hand hold to maneuver the machine. Constructed of 1” diameter, 6063 aluminum alloy tubing and durable black powder-coat finish. 

With its all-metal construction, the WARN® VRX Winch includes the new clutch developed from the WARN® 4WD hub lock design while its 50 feet of lightweight Synthetic Rope is both easy to handle and extremely strong.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Synthetic rope available in 2,500 lb. capacity</li>
	<li>2,500lb, 3/16&rdquo; synthetic rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

The VRX Wiring Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Handlebar-mounted rocker switch</li>
</ul>

&nbsp;

Note

<ul>
	<li>2020 Kodiak 450 requires Mount Kit #DBY-10600-10-00 or Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
	<li>2018-2019 Kodiak 450 requires Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
</ul>

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES