rootCategory.atv.atv-accessories

Yamaha Genuine

GYTR

Warn

Heat Demon

ATV TEK

Techmount

Magellan

EcoXGear®

Dynojet

Black

Silver

Blue

Red/Black

Blue/White

Black/White

White

series

Series

Protection

Winches, Plow & Tow

Performance

Storage

Handlebars & Controls

Audio and Tech

Air Filter

Covers

Overfenders & Flares

Miscellaneous

Heated Accessories

Tools

Bumpers, Grab Bars & Hitches

Windshields & Wind Protection

Lighting

product_category

Product Category

$0.00 - $99.99

$100.00 - $199.99

$200.00 - $299.99

$300.00 - $399.99

$400.00 - $499.99

$500.00 - $599.99

$700.00 - $799.99

price

Price

brand

Brand

Pounds: 2500

Pounds: 4500

Inch: 48

Pounds: 3500

mm: 36

mm: 14

size

Size

color

Color

These heated grips are a rider’s best friend in cold weather conditions, eliminating the aches that come with cold air, wind, and rain out on the trail.  

&nbsp;

<ul>
	<li>3-position switch: Off, Low, High</li>
	<li>Simple plug-and-play design &mdash; no cutting, splicing, or crimping of wires</li>
	<li>Easy clamp installation &mdash; no grip glue needed</li>
	<li>Low power consumption &mdash; draws less than 3 amps while in use</li>
</ul>

The Grizzly 700 Brush Guard provides additional protection while you’re out on the trail. It was designed to seamlessly integrate with the front profile and adds a tough, aggressive look.

&nbsp;

<ul>
	<li>Helps protect the front end, fenders, and headlights while complimenting the styling of your ATV</li>
	<li>Durable bent steel tubing construction</li>
	<li>Direct replacement for stock front grab bar &mdash; utilizes stock mounting points and hardware</li>
</ul>

NOTICE: If you install the Quick-Detach Plow System by WARN&reg; with the Heavy-Duty Front Brush Guard mounted, do not adjust the plow blade to its full left or right angle. This could cause cosmetic damage to the Brush Guard.

The GYTR® Billet Air Filter Adaptor Plate is made from 6061-T6 billet aluminum. Allows the use of our GYTR High Flow Air Filter.

Provides generous protection from cold, wind, debris to rider’s hands, chest, head for enhanced comfort.

<ul>
	<li>
	&nbsp;Constructed of tough, durable&nbsp;and shatter-resistant polycarbonate
	</li>
	<li>
	&nbsp;Easy on easy off (after initial install) for servicing or towing, etc.
	</li>
	<li>
	&nbsp;Tilt is adjustable
	</li>
</ul>

Combines the nerf bars, footwells, and foot pegs into one accessory.

&nbsp;

<ul>
	<li>1.25&quot;-diameter 6063 aluminum alloy tubing</li>
	<li>Foot Pegs are 2.5&quot; wide and 0.75&quot; longer than stock with two height positions 
	(0.75&quot; lower than stock or 1.25&quot; lower than stock)</li>
	<li>Extruded joint clamp helps make installation and alignment a snap</li>
	<li>Durable 1.5&quot;-wide black nylon webbing that is used in the nerf bar and footwell areas (replacement for wear and tear available separately)</li>
	<li>5&deg; sweep for ultimate leverage, comfort, and clearance</li>
	<li>Meets all AMA&reg; and ATVA&reg; racing regulations</li>
	<li>For closed-course competition only</li>
</ul>

This 1.5" wide nylon webbing is required for use of the accessory GYTR Nerf Bars. 

Direct replacement for the wire rope of the WARN 2500 lb. winch.

Direct replacement for the synthetic rope of the WARN 4500 lb. winch.

The Aluminum Swing Arm Skid Plate utilizes a high-tech, one-piece design with a brushed-aluminum finish. Helps protect and complement the look of the factory aluminum swing arm. Includes aircraft-quality hardware.

The GYTR 520 GMX2 Non-Sealed (Non O-Ring) Chain is specifically designed for Motocross and Supercross, and race-tested by Factory Riders to meet today's high performance machines. The 520 GMX2 features high-tech CrH-coated pins for extremely hard outside surface and softer inside to increase the impact strength.

&nbsp;

<ul>
	<li>
	Displacement limit: up to 500cc
	</li>
	<li>
	Clip-type and rivet-type master links included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,400lbs
	</li>
	<li>
	120 links
	</li>
</ul>

Meets all AMA and ATVA racing regulations. Requires webbing, sold separately. For closed-course competition only.

The VRX Wiring Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Handlebar-mounted rocker switch</li>
</ul>

&nbsp;

Note

<ul>
	<li>2020 Kodiak 450 requires Mount Kit #DBY-10600-10-00 or Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
	<li>2018-2019 Kodiak 450 requires Front Grab Bar #B5R-F84L0-V0-00. Sold separately.</li>
</ul>

The “Bull Horn” design helps protect the shocks and radiator while offering a large hand hold to maneuver the machine in mud.

<ul>
	<li>
	Wrap-under design provides a smooth transition from the front grab bar to the glide plate without affecting the stock approach angles.
	</li>
	<li>
	Constructed of strong, lightweight 6063 and 5052 aluminum alloy tubing and sheet metal with a durable finish.
	</li>
</ul>

The Raptor 700R Special Edition Footwells are constructed of black powder-coated aluminum tube and plate. The footwells features a unique punch-through design that enhances the complete styling of the Raptor 700R.

Requires the use of the Plastic Footwell Extensions.

These anodized 6061 billet aluminum timing plugs replace the stock plastic plugs.

The GYTR 520 GDXL2 Quadra-Ring Lite Chain  is designed to reduce friction up to 40% and last 50% longer than conventional O-ring chains.

<ul>
	<li>The 520 GDXL2 is the lighter version of the 520 GDX chain and is ideal for small and mid-sized off-road motorcycles, sport bikes and ATVs up to 750cc.</li>
</ul>

Note: Chains will not work on vehicles with a shaft drive.

Note: YZF-R6 and YZF-R6S-&nbsp;GYTR 520 chains require purchase of front and rear 520 sprockets, sold separately.

<ul>
	<li>
	Displacement limit: up to 750cc
	</li>
	<li>
	Rivet-type master link included
	</li>
	<li>
	Replacement clip-type and rivet-type master links also available, each sold separately
	</li>
	<li>
	Tensile strength = 8,500lbs
	</li>
	<li>
	120 links
	</li>
</ul>

These HI/LO ATV Heated Grips by Heat Demon® increase rider comfort.

A collaboration with Heat Demon.&nbsp;

<ul>
	<li>
	Even and consistent heat distribution from unique flex-circuit technology
	</li>
	<li>
	Special molded rubber grips
	</li>
	<li>
	Totals 40 watts and draws less than 3 amps
	</li>
	<li>
	Fits all 7/8&quot; handlebars
	</li>
</ul>

The Front Winch Mount Kit includes everything needed to install a VRX Series winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Mount plate</li>
	<li>Unit-specific wiring and Yamaha connectors</li>
	<li>Dedicated location for handlebar-mounted rocker switch</li>
	<li>Power cables</li>
</ul>

The Front Grab Bar helps provide protection to components on the front of your YFZ450R while offering a large hand hold to maneuver the machine. Constructed of 1" diameter, 6063 aluminum alloy tubing and a durable black powder-coat finish

The Warn® Light-Duty Winch Accessory Kit includes all of the essential tools needed to properly operate the WARN® winch.

A collaboration with WARN&reg;. Kit includes:

<ul>
	<li>Two (2) 1/2&quot; (12.7 mm) shackles - 4,500 lb. (2,041 kg) weight rating</li>
	<li>Two (2) 1&quot;x 8&rsquo; (25.4mm x 2.4m) tree trunk protectors</li>
	<li>One (1) tool roll constructed of durable ballistic nylon with secure hook-andloop enclosures to strongly attach either ATV rack or SxS roll bar</li>
	<li>Line damper for increased safety</li>
	<li>Additional storage</li>
	<li>Limited one (1) year warranty</li>
</ul>

These overfenders feature a tough, aggressive look and a custom formed design that helps protect you from water, mud, and other trail debris.

&nbsp;

<ul>
	<li>Constructed of tough, durable TPO plastic that is wider at the base to deflect more trail debris</li>
	<li>Overfenders follow the fender lines to create seamless, unified body lines</li>
</ul>

These oversized (taller and longer) foot pegs are excellent for advanced riders. Pegs are 10mm taller and 40mm longer than stock.

This wiring kit is required for use with the Adventure Pro on 2018 and earlier models.

A collaboration with Magellan. Provides limited data integration and full GPS function on these models:

<ul>
	<li>
	2016-2018 Grizzly
	</li>
	<li>
	2016-2018 YXZ1000R/SS
	</li>
	<li>
	2018 Wolverine X4
	</li>
</ul>

Provides GPS function&nbsp;on these models:

<ul>
	<li>
	All years Viking
	</li>
	<li>
	2018 and earlier Wolverine
	</li>
</ul>

Note: Adventure Pro, sold separately.&nbsp;

With its all-metal construction, the WARN® VRX Winch with 50 feet of Wire Rope includes the new clutch developed from the WARN® 4WD hub lock design.

A collaboration with WARN&reg;.

<ul>
	<li>Upgraded waterproof contactor</li>
	<li>Wire rope available in 3,500 pound capacities</li>
	<li>3,500 lb.: 7/32&rdquo; steel rope</li>
	<li>Automatic load-holding brake for precise control</li>
	<li>Durable all-metal three-stage planetary gear train</li>
	<li>IP68-rated waterproof winch sealing</li>
	<li>Black powder-coated finish for corrosion resistance</li>
</ul>

See unit specific fitment for required winch mount and/or wiring kit.

The Aluminum Engine/Frame Skid Plate helps protect the frame, steering stem sleeve, engine, and chassis components. Strong, lightweight 0.16"-thick 5052 aluminum alloy sheet metal construction. Cannot be installed in conjunction with Plastic Frame Glide Plate.

The last thing you want is your gear unprotected with a loose fit and an unreliable mount. Keep your focus on the hunt by giving your gun, bow, etc. the careful fit and proper protection it deserves. In addition, experience effortless installation, solid mounting, and finger-adjustable knobs for quick, tool-free alterations while you’re on the move. Fits all Utility ATV Racks.

&nbsp;

<ul>
	<li>
	Improved tubular and composite rack mounting system
	</li>
	<li>
	Includes forks (2), mounting blocks (2), rubber snubbers (2), and all necessary mounting hardware for easy installation
	</li>
</ul>

&nbsp;

The Yamaha Sport ATV Cover helps protect your ATV while in storage. Storage bag included.

These Utility ATV Rigid Cargo Boxes feature a solid plastic design for durability with solid integrated hinged lids. Water and dirt-resistant seal and design. Two cam-over elastic latches which can be locked with padlocks. Solid mounting system that works with most Utility ATV racks.

&nbsp;

<ul>
	<li>Front trunk: 30&quot;L x 13&quot;W x 9&quot;H</li>
	<li>Rear trunk: 37&quot;L x 16&quot;W x 14&quot;H</li>
</ul>

These rack extensions feature a rugged design and add functional cargo space to the OE racks. Constructed of bent steel tubing for strength and durability. The Rear Rack Extension extends rear rack height to 7.5”.

<ul>
	<li>Compatible with accessory Gun Boot Mount, Cooler Carrier, and Rack Storage Bags (all sold separately)</li>
	<li>Black powder-coated finish</li>
	<li>Easy to install racks using included hardware</li>
</ul>

GYTR® Front Sprockets by Talon are made from heat-treated chromoly steel and CNC-machined to extremely high tolerances.

Zinc finish to help combat corrosion. Sprockets feature self-cleaning grooves to shed mud and grit, as well as reduce weight while maintaining strength. Sprocket sizes that increase the final drive ratio over stock are for closed-course competition only on &rsquo;06 and later models because regulated exhaust emissions are affected.

YZ models are for closed-course competition use regardless of modification.

&nbsp;

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

Shop

Parts

Maintenance

Inside Yamaha

Find a Dealer

ACCESSORIES